Question: Is Thompson’S Water Seal Good?

How many years does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years..

Can you use a sprayer for Thompson’s Water Seal?

The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. There are no concerns about it eroding any of the seals inside of it.

How do you clean Thompson’s Water Seal?

To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product. Some good choices for this are Krud Kutter or Simple Green.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application.

How do you seal wood naturally?

Here are the basics:Step 1: Clean/Prep. Make sure your wood is sanded, dry and free of dust and debris. … Step 2: Apply Tung Oil with a Natural Bristle Brush. … Step 3: Wait, then Re-Oil. … Step 4: Remove any Excess Oil. … Step 5: Add one More Coat (the next day)

What happens if it rains after you seal your deck?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.

How often should you use Thompson Water Seal?

one to three yearsThompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

What is the best wood water sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

How many coats of Thompson Water Seal do I need?

2 coatsshake the can vigorously before use. Thompson’s Water seal has a slightly milky appearence in the can,but clears quickly upon application. For best results ensure the surface is as dry as possible. Apply 2 coats using brush,roller or sprayer.

Can you put Thompson Water Seal on treated wood?

However, most of the water-repellent sealers sold at home centers, paint stores and lumber yards are suitable for pressure-treated wood as well as other outdoor woods such as cedar and redwood. The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.

How do you remove Thompson’s Water Seal?

So here is the only recipe that worked for me…Remove the product with a real wood striper, i used “Super remover” this product can dissolve about anything, wear gloves and glasses. … Use a green abrasive pad with “Super remover” and scrub the surface.Sand the surface.More items…

Does Thompson Water Seal change the color of wood?

Thompson’s® WaterSeal® Waterproofing Wood Protector – Clear doesn’t change the color of the wood. Transparent deck stain adds a hint of color and shows the most wood grain.

Is it better to seal or stain a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

How do you Waterproof untreated wood?

There are three surefire ways to waterproof your wood for years to come.Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish.Seal the wood with coating of polyurethane, varnish, or lacquer.Finish and waterproof wood simultaneously with a stain-sealant combo.

Can you treat wood yourself?

You simply soak the lumber in the borate solution. Most people just build a trough using 6-mil plastic sheeting. The different borate chemicals come with instructions telling you how to mix the powder with water and how long to soak the lumber.

How long does Thompson Water Seal need to dry before rain?

24 hoursThereof, how long does Thompson Water Seal need to dry before rain? The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.